HOTPOINT · PTAC
HOTPOINT AHES09D2XXA — 9,000 BTU/h
HOTPOINT PTAC 9000 BTU 230/208 VOLT 15A E HEAT R32 SERIES A AHES09D2XXA
Specifications
| Capacity (BTU/h) | 9,000 BTU/h |
Specs are decoded from the model number and retailer listings. Confirm against the manufacturer submittal sheet before purchase.
Efficiency & refrigerant
This unit uses R-32, a current low-GWP (A2L) refrigerant that meets the post-2025 EPA AIM Act standard — future-proof for serviceability. A2L refrigerants are mildly flammable, so above a charge threshold the system needs factory leak detection; a certified installer handles this.
Rebates & tax credits
This category does not have its own line in the federal 25C tax credit. Some matched-system components may still factor into a qualifying installation — confirm with your installer. See the federal credit details →
This is not tax advice. We do not know this exact model's certified efficiency rating, so we cannot say it qualifies for any specific amount. Eligibility depends on the installed system's AHRI-matched rating, your tax liability, and the home being your residence. Always confirm with your installer and a tax advisor.
Official documents
Find the manufacturer's submittal sheet, installation manual, owner's manual, and warranty for the HOTPOINT AHES09D2XXA:
Search HOTPOINT literature for AHES09D2XXA →
Documents are hosted by the manufacturer — BuyerBloc links to the official source and never re-hosts copyrighted manuals.
Matched systems (AHRI)
For ducted split systems, the rated efficiency only holds for AHRI-certified matched combinations of outdoor unit, coil, and air handler. Look up certified matches for this model in the official directory:
Find AHRI-certified matches for AHES09D2XXA →
A retailer "system bundle" is not proof of an AHRI reference number. Verify the match in the AHRI Directory.
Before you buy or install
A PTAC or through-the-wall unit is sized to the room and to a standard wall-sleeve opening — confirm the sleeve dimensions and the electrical plug/voltage before buying. Heat options (electric resistance vs heat pump) and the required circuit amperage vary by model. These are usually plug-in, but the wall sleeve and circuit should be confirmed by a qualified installer.
Maintenance
Clean the front filter monthly and vacuum the coils periodically. Keep the room-side intake unobstructed; a dirty filter is the most common cause of weak cooling.
HOTPOINT AHES09D2XXA — questions
How much does the HOTPOINT AHES09D2XXA cost?
The market median is $596 (typical $596 to $596). No single retailer lists this exact model for direct purchase right now — that figure is the aggregated market benchmark, equipment only.
Is that the installed price?
No — this is the equipment (box) price. A full installed ptac (matched components, labor, permits) costs significantly more, and that install markup is where quotes vary most.
What refrigerant does the AHES09D2XXA use?
The HOTPOINT AHES09D2XXA uses R-32.
Does the HOTPOINT AHES09D2XXA qualify for a federal tax credit?
The federal 25C credit applied only to systems placed in service on or before December 31, 2025, so it does not apply to new installs after that date. State and utility rebates (via DSIRE) may still apply — confirm eligibility with your installer and a tax advisor.
Related models
More PTAC Units
- Amana PTC123J35AXXX · 12,000 BTU/h from $1,195
- Amana PTH123J35AXXX · 12,000 BTU/h from $1,240
- Amana PTC153J50AXXX · 15,000 BTU/h from $1,250
- Amana PTH153J35AXXX · 15,000 BTU/h from $1,350
- Amana PTC073J25AXXX · 7,000 BTU/h from $1,120
- Amana PTC093J35AXXX · 9,000 BTU/h from $1,155
- Amana PTH093J35AXXX · 9,000 BTU/h from $1,260
- Amana PTC173J50AXXX · 17,000 BTU/h from $1,295